Focusing a camera and the first tests

WARNING: THIS IS A PAGE IN PROGRESS! DO NOT FOLLOW IT IF YOU ARE LOOKING FOR THE BUILDING OF A CAMERA FROM SCRATCH

Ahoj! In this section, you will cable the camera for the first time, do the preliminary focusing and test the whole system. 

Before we come to focusing camera, we need to setup and configure it. By this is mean the IP configuration of camera and setting up the parameters of camera needed for its night operation. Instead of text, you will now watch a video with detailed hands on instructions:

header1

Header2

You are now done with this section and now you are going to focus your camera and put all bits and pieces together for the first test. Exciting, isn't it? Back to the signpost page.