Build & Install & Setup your camera - The complete how-to

WARNING: THIS IS A PAGE IN PROGRESS! DO NOT FOLLOW IT IF YOU ARE LOOKING FOR THE BUILDING OF A CAMERA FROM SCRATCH

Howdy future GMN camera operator! You will find here all the information needed to build a camera, install the software, set up a camera and where to mount it and point it. For your convenience the how-to is divided into different sections, logically grouping the steps. Let’s have a look at the steps needed to get your camera built and in production.

--> Shopping list and tools needed

--> Building the camera itself

--> Installing OS onto a Raspberry Pi

--> Focusing a camera, and the first tests

--> Installing a camera into the position

--> The last steps

--> Optional steps

--> Announce it to the community