Optional steps

WARNING: THIS IS A PAGE IN PROGRESS! DO NOT FOLLOW IT IF YOU ARE LOOKING FOR THE BUILDING OF A CAMERA FROM SCRATCH

Ahoj! In this section, you will be introduced to some more, but optional steps.

Connecting the camera to VPN (optional)

IMPORTANT NOTE: You should only complete this step if you were instructed to do so.

1) Open the terminal

2) Navigate to Desktop (there should be a DownloadOpenVPNconfig.sh script there):

cd ~/Desktop

3) Run the DownloadOpenVPNconfig.sh script and give it your station code as the argument. In this example I’m using CA0001 - make sure to use your station code.

./DownloadOpenVPNconfig.sh CA0001

4) If everything goes well, you will see the message: Initialization Sequence Completed. Press CTRL + C to exit the script.

5) Reboot your Pi.

6) That’s it, the VPN should be working on your Pi! To check the VPN IP address, hover your mouse cursor on the VNC icon (upper right), and it will show you an IP address which looks something like this: 10.8.X.X. If you are also connected to the VPN, you may use this IP address to connect to your camera. If you want to connect to the VPN with your PC, please contact Denis or the GMN group for more details. If you are on Windows, the domain name like ca0001.gmnnet (replace ca0001 with your station code, lowercase) should work too.

You are now done with this section and you may introduce yourself and your fancy new camera to the friendly community. Back to the signpost page.