Build A Camera: Difference between revisions
Jump to navigation
Jump to search
Markmcintyre (talk | contribs) (Created page with "Page being written - please come back later!") |
Markmcintyre (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
WORK IN PROGRESS PLEASE REFER TO GOOGLE DOC FOR NOW | |||
= Parts and Tools needed = | |||
# IMX291 sensor board | |||
# Lens with the lens holder - 4mm, 6mm are M16 mount as pictured, while other lenses might be CS which have a different holder | |||
# 2x M2 screws (they come with the camera board) | |||
# Camera housing | |||
# Small cable interface | |||
# Large cable interface | |||
# PoE cable | |||
# Camera board holder (comes with the housing, but you might have to tell the seller to send one) | |||
# Holder metal plate (comes with the board holder) | |||
# 3x M2 screws, 12 mm long (purchase separately) | |||
# 1x M3-.50 screws, 6mm long (purchase locally) | |||
Revision as of 15:30, 23 April 2021
WORK IN PROGRESS PLEASE REFER TO GOOGLE DOC FOR NOW
Parts and Tools needed
- IMX291 sensor board
- Lens with the lens holder - 4mm, 6mm are M16 mount as pictured, while other lenses might be CS which have a different holder
- 2x M2 screws (they come with the camera board)
- Camera housing
- Small cable interface
- Large cable interface
- PoE cable
- Camera board holder (comes with the housing, but you might have to tell the seller to send one)
- Holder metal plate (comes with the board holder)
- 3x M2 screws, 12 mm long (purchase separately)
- 1x M3-.50 screws, 6mm long (purchase locally)