Pi4 with Raspbian Bullseye - Revision history

Markmcintyre: /* Installing CMN Binviewer */

2024-05-17T15:05:48Z

Installing CMN Binviewer

← Older revision		Revision as of 10:05, 17 May 2024
Line 312:		Line 312:
	chmod +x ~/vBinviewer/CMN_Binviewer		chmod +x ~/vBinviewer/CMN_Binviewer
	ln -s ~/vBinviewer/CMN_Binviewer ~/Desktop/CMN_Binviewer		ln -s ~/vBinviewer/CMN_Binviewer ~/Desktop/CMN_Binviewer

			Support notes:
			* If you get "ImportError: libopenblas.so.0" try running this in a Terminal window - sudo apt-get install -y libopenblas-dev

Markmcintyre: /* Installing CMN Binviewer */

2024-05-17T14:45:50Z

Installing CMN Binviewer

← Older revision		Revision as of 09:45, 17 May 2024
Line 289:		Line 289:
	To view the binary files of RMS you can use the Binviewer program (previously from the Croatian Meteor Network CMN, now maintained by Mark McIntyre). If you're using Bullseye or an earlier version of Raspian, install this under your normal user account (''[Yourname]''). If you're using Bookworm, install it in the rms user account as the newer OS does not permit access to other account's files. If you want to open files you can browse to /home/rms/RMS_data. Since data is read only, you run no risk of disturbing your RMS installation. You need to run the graphic desktop environment for this though. Alternatively you can setup the Binviewer on another computer and transfer the files there. If you want to run Samba to get the files from the Raspberry, be careful though. RMS may store over 5000 files in one directory. Samba will create a heavy system load when opening the directories. It is better to copy the files locally using secure copy (''scp''). If you want to install CMN Binviewer locally (not on the Raspberry) then look here: [https://github.com/CroatianMeteorNetwork/cmn_binviewer]		To view the binary files of RMS you can use the Binviewer program (previously from the Croatian Meteor Network CMN, now maintained by Mark McIntyre). If you're using Bullseye or an earlier version of Raspian, install this under your normal user account (''[Yourname]''). If you're using Bookworm, install it in the rms user account as the newer OS does not permit access to other account's files. If you want to open files you can browse to /home/rms/RMS_data. Since data is read only, you run no risk of disturbing your RMS installation. You need to run the graphic desktop environment for this though. Alternatively you can setup the Binviewer on another computer and transfer the files there. If you want to run Samba to get the files from the Raspberry, be careful though. RMS may store over 5000 files in one directory. Samba will create a heavy system load when opening the directories. It is better to copy the files locally using secure copy (''scp''). If you want to install CMN Binviewer locally (not on the Raspberry) then look here: [https://github.com/CroatianMeteorNetwork/cmn_binviewer]

	To install on the Rasberry, first log in. Then do:		Note: these instructions assume you have already installed RMS on your Raspberry Pi. If you've not done that, do it first. This is needed because RMS and Binviewer require many of the same system libraries installed with apt.

			To install on the Rasberry Pi, first log in. Then do:
	mkdir -p ~/source		mkdir -p ~/source
	cd ~/source		cd ~/source

Markmcintyre: /* Installing CMN Binviewer */

2024-05-14T19:57:57Z

Installing CMN Binviewer

← Older revision		Revision as of 14:57, 14 May 2024
Line 287:		Line 287:

	== Installing CMN Binviewer ==		== Installing CMN Binviewer ==
	To view the binary files of RMS you can use the Binviewer program from the ~~Croation~~ Meteor Network. ~~Best practise is to~~ install this under your normal user account (''[Yourname]''). In the ~~default Raspbian installation you have read~~ access to ~~the~~ files ~~of other users~~. If you want to open files you can browse to /home/rms/RMS_data. Since data is read only, you run no risk of disturbing your RMS installation. You need to run the graphic desktop environment for this though. Alternatively you can setup the Binviewer on another computer and transfer the files there. If you want to run Samba to get the files from the Raspberry, be careful though. RMS may store over 5000 files in one directory. Samba will create a heavy system load when opening the directories. It is better to copy the files locally using secure copy (''scp''). If you want to install CMN Binviewer locally (not on the Raspberry) then look here: [https://github.com/CroatianMeteorNetwork/cmn_binviewer]		To view the binary files of RMS you can use the Binviewer program (previously from the Croatian Meteor Network CMN, now maintained by Mark McIntyre). If you're using Bullseye or an earlier version of Raspian, install this under your normal user account (''[Yourname]''). If you're using Bookworm, install it in the rms user account as the newer OS does not permit access to other account's files. If you want to open files you can browse to /home/rms/RMS_data. Since data is read only, you run no risk of disturbing your RMS installation. You need to run the graphic desktop environment for this though. Alternatively you can setup the Binviewer on another computer and transfer the files there. If you want to run Samba to get the files from the Raspberry, be careful though. RMS may store over 5000 files in one directory. Samba will create a heavy system load when opening the directories. It is better to copy the files locally using secure copy (''scp''). If you want to install CMN Binviewer locally (not on the Raspberry) then look here: [https://github.com/CroatianMeteorNetwork/cmn_binviewer]

	To install on the Rasberry, first log in. Then do:		To install on the Rasberry, first log in. Then do:

Markmcintyre: /* Installing CMN Binviewer */

2024-05-14T18:25:20Z

Installing CMN Binviewer

← Older revision		Revision as of 13:25, 14 May 2024
Line 290:		Line 290:

	To install on the Rasberry, first log in. Then do:		To install on the Rasberry, first log in. Then do:
			mkdir -p ~/source
	cd ~/source		cd ~/source
	git clone https://github.com/CroatianMeteorNetwork/cmn_binviewer.git		git clone https://github.com/CroatianMeteorNetwork/cmn_binviewer.git

Markmcintyre: /* Installing CMN Binviewer */

2024-05-14T18:24:39Z

Installing CMN Binviewer

← Older revision		Revision as of 13:24, 14 May 2024
Line 289:		Line 289:
	To view the binary files of RMS you can use the Binviewer program from the Croation Meteor Network. Best practise is to install this under your normal user account (''[Yourname]''). In the default Raspbian installation you have read access to the files of other users. If you want to open files you can browse to /home/rms/RMS_data. Since data is read only, you run no risk of disturbing your RMS installation. You need to run the graphic desktop environment for this though. Alternatively you can setup the Binviewer on another computer and transfer the files there. If you want to run Samba to get the files from the Raspberry, be careful though. RMS may store over 5000 files in one directory. Samba will create a heavy system load when opening the directories. It is better to copy the files locally using secure copy (''scp''). If you want to install CMN Binviewer locally (not on the Raspberry) then look here: [https://github.com/CroatianMeteorNetwork/cmn_binviewer]		To view the binary files of RMS you can use the Binviewer program from the Croation Meteor Network. Best practise is to install this under your normal user account (''[Yourname]''). In the default Raspbian installation you have read access to the files of other users. If you want to open files you can browse to /home/rms/RMS_data. Since data is read only, you run no risk of disturbing your RMS installation. You need to run the graphic desktop environment for this though. Alternatively you can setup the Binviewer on another computer and transfer the files there. If you want to run Samba to get the files from the Raspberry, be careful though. RMS may store over 5000 files in one directory. Samba will create a heavy system load when opening the directories. It is better to copy the files locally using secure copy (''scp''). If you want to install CMN Binviewer locally (not on the Raspberry) then look here: [https://github.com/CroatianMeteorNetwork/cmn_binviewer]

	To install on the Rasberry ~~under your own account~~, first log in. Then do:		To install on the Rasberry, first log in. Then do:
	git clone https://github.com/CroatianMeteorNetwork/cmn_binviewer.git		cd ~/source
	virtualenv -p python3 ~/vBinviewer		git clone https://github.com/CroatianMeteorNetwork/cmn_binviewer.git
	source ~/vBinviewer/bin/activate		virtualenv -p python3 ~/vBinviewer
	cd cmn_binviewer		source ~/vBinviewer/bin/activate
	pip install -r requirements.txt		cd ~/source/cmn_binviewer
			pip install -r requirements.txt

	Then create the startscript for CMN Binviewer:		Then create the startscript for CMN Binviewer:
	sudo nano ~/vBinviewer/CMN_Binviewer		sudo nano ~/vBinviewer/CMN_Binviewer

	And paste these contents in it:		And paste these contents in it:
	#!/usr/bin/bash		#!/usr/bin/bash
	source ~/vBinviewer/bin/activate		source ~/vBinviewer/bin/activate
	cd ~/source/cmn_binviewer		cd ~/source/cmn_binviewer
	python CMN_binViewer.py		python CMN_binViewer.py

	~~And to~~ create a link to the script from the Desktop:		Make the script executable and create a link to the script from the Desktop:
	ln -s ~/vBinviewer/CMN_Binviewer ~/Desktop/CMN_Binviewer		chmod +x ~/vBinviewer/CMN_Binviewer
			ln -s ~/vBinviewer/CMN_Binviewer ~/Desktop/CMN_Binviewer

Markmcintyre: /* Installing CMN Binviewer */

2024-05-14T18:22:10Z

Installing CMN Binviewer

← Older revision		Revision as of 13:22, 14 May 2024
Line 291:		Line 291:
	To install on the Rasberry under your own account, first log in. Then do:		To install on the Rasberry under your own account, first log in. Then do:
	git clone https://github.com/CroatianMeteorNetwork/cmn_binviewer.git		git clone https://github.com/CroatianMeteorNetwork/cmn_binviewer.git
	virtualenv ~~--system-site-packages~~ -p python3 ~/vBinviewer		virtualenv -p python3 ~/vBinviewer
	source ~/vBinviewer/bin/activate		source ~/vBinviewer/bin/activate
	cd cmn_binviewer		cd cmn_binviewer
Line 302:		Line 302:
	#!/usr/bin/bash		#!/usr/bin/bash
	source ~/vBinviewer/bin/activate		source ~/vBinviewer/bin/activate
	cd cmn_binviewer		cd ~/source/cmn_binviewer
	python CMN_binViewer.py		python CMN_binViewer.py

	And to create a link to the script from the Desktop:		And to create a link to the script from the Desktop:
	ln -s ~/vBinviewer/CMN_Binviewer ~/Desktop/CMN_Binviewer		ln -s ~/vBinviewer/CMN_Binviewer ~/Desktop/CMN_Binviewer

Lancer: /* Create startscripts to run RMS */

2023-01-24T19:13:59Z

Create startscripts to run RMS

← Older revision		Revision as of 14:13, 24 January 2023
Line 267:		Line 267:
	fi		fi

	Raspbian is ~~runnign~~ a program named ''cron'' to execute tasks at certain times. The script above needs to be started every 10 minutes. That way RMS is (re-)started automatically. By creating the file ''/tmp/RESTART_RMS'' RMS can be stopped and restarted 10 minutes later. The effect of this is that RMS is updated.		Raspbian is running a program named ''cron'' to execute tasks at certain times. The script above needs to be started every 10 minutes. That way RMS is (re-)started automatically. By creating the file ''/tmp/RESTART_RMS'' RMS can be stopped and restarted 10 minutes later. The effect of this is that RMS is updated.
	sudo nano /etc/crontab		sudo nano /etc/crontab

Lancer: /* Create the virtual Python environment for RMS */

2023-01-23T21:57:56Z

Create the virtual Python environment for RMS

← Older revision		Revision as of 16:57, 23 January 2023
Line 198:		Line 198:
	pip3 install pyqtgraph		pip3 install pyqtgraph
	pip3 install pyqt5 --config-settings --confirm-license= --verbose		pip3 install pyqt5 --config-settings --confirm-license= --verbose
			pip3 install opencv-python

	And exit the ''rms'' account:		And exit the ''rms'' account:

Lancer at 18:57, 23 January 2023

2023-01-23T18:57:05Z

← Older revision		Revision as of 13:57, 23 January 2023
Line 175:		Line 175:

	Create the virtual environment:		Create the virtual environment:
			cd ~
	virtualenv vRMS		virtualenv vRMS

Lancer: /* Install packages */

2023-01-23T18:04:14Z

Install packages

← Older revision		Revision as of 13:04, 23 January 2023
Line 146:		Line 146:

	Next install additional packages which are needed by RMS. This command will install even mopre packages that you specify. This is because some packages depend on others. And some packages won't be installed, because they are already present.		Next install additional packages which are needed by RMS. This command will install even mopre packages that you specify. This is because some packages depend on others. And some packages won't be installed, because they are already present.
	sudo apt-get install -y cmake git mplayer python3 python3-dev python3-tk python3-pip libblas-dev libatlas-base-dev liblapack-dev at-spi2-core libopencv-dev libffi-dev libssl-dev socat ntp libxml2-dev libxslt-dev imagemagick ffmpeg qt5-qmake python3-pyqt5 libqt5gstreamer-1.0-0 python3-pyqt5.qtmultimedia qtgstreamer-plugins-qt5 libqt5gstreamer-dev libqt5gstreamerui-1.0-0 libqt5gstreamerutils-1.0-0 g++ g++-10 gcc-10 gcc-10-base gcc-7-base gcc-8-base gcc-9-base gfortran gfortran-10 libgstreamer-opencv1.0-0 python3-opencv python3-opencv-apps ros-opencv-apps opencv-data opencv-doc libopencv* python3-setuptools python3-scipy cython3 cython3-dbg python3-pytest-cython python3-astropy* python3-paramiko python3-matplotlib* libcfitsio9 libwcs7 python3-pyqtgraph python3-git python3-pil git git-man wxpython-tools wx3.0-headers wx-common python3-wxgtk4.0 libwxgtk3.0-gtk3-dev libwxgtk3.0-gtk3-0v5 libwxbase3.0-dev libwxbase3.0-0v5 screen python3-six python3-numpy python3-imageio libgstreamer-plugins-base1.0-dev libwebkit2gtk-4.0-dev libwebkit2gtk-4.0-37 dpkg-dev build-essential libjpeg-dev libtiff-dev libsdl1.2-dev libnotify-dev freeglut3 freeglut3-dev libghc-gtk3-dev python-tk gstreamer1.0-tools gstreamer1.0-plugins-base-apps gstreamer1.0-rtsp gstreamer1.0-plugins-good gstreamer1.0-plugins-base gstreamer1.0-python3-plugin-loader ~~gstreamer1.0-videosink~~ gstreamer1.0-opencv gstreamer1.0-pulseaudio gstreamer1.0-libav gstreamer1.0-plugins-rtp gstreamer1.0-x gstreamer1.0-alsa		sudo apt-get install -y cmake git mplayer python3 python3-dev python3-tk python3-pip libblas-dev libatlas-base-dev liblapack-dev at-spi2-core libopencv-dev libffi-dev libssl-dev socat ntp libxml2-dev libxslt-dev imagemagick ffmpeg qt5-qmake python3-pyqt5 libqt5gstreamer-1.0-0 python3-pyqt5.qtmultimedia qtgstreamer-plugins-qt5 libqt5gstreamer-dev libqt5gstreamerui-1.0-0 libqt5gstreamerutils-1.0-0 g++ g++-10 gcc-10 gcc-10-base gcc-7-base gcc-8-base gcc-9-base gfortran gfortran-10 libgstreamer-opencv1.0-0 python3-opencv python3-opencv-apps ros-opencv-apps opencv-data opencv-doc libopencv* python3-setuptools python3-scipy cython3 cython3-dbg python3-pytest-cython python3-astropy* python3-paramiko python3-matplotlib* libcfitsio9 libwcs7 python3-pyqtgraph python3-git python3-pil git git-man wxpython-tools wx3.0-headers wx-common python3-wxgtk4.0 libwxgtk3.0-gtk3-dev libwxgtk3.0-gtk3-0v5 libwxbase3.0-dev libwxbase3.0-0v5 screen python3-six python3-numpy python3-imageio libgstreamer-plugins-base1.0-dev libwebkit2gtk-4.0-dev libwebkit2gtk-4.0-37 dpkg-dev build-essential libjpeg-dev libtiff-dev libsdl1.2-dev libnotify-dev freeglut3 freeglut3-dev libghc-gtk3-dev python-tk gstreamer1.0-tools gstreamer1.0-plugins-base-apps gstreamer1.0-rtsp gstreamer1.0-plugins-good gstreamer1.0-plugins-base gstreamer1.0-python3-plugin-loader gstreamer1.0-opencv gstreamer1.0-pulseaudio gstreamer1.0-libav gstreamer1.0-plugins-rtp gstreamer1.0-x gstreamer1.0-alsa gstreamer1.0-gl

	Finally, install the Python virtual environment tool with:		Finally, install the Python virtual environment tool with: